Glowe Voltage – Series 1

All existing orders shipping out by end of September.  Expected back in stock:  November 14.

Glowe Voltage – Series 1

(You can find technical specifications below, but if you’re not a battery expert? Read on. Instead of trying to come up with a catchy sales pitch we are going to do our best to explain what you can expect from our batteries in plain English.)

General Info:

The Series 1 is our largest capacity battery, clocking in at over 90 amp hours of storage. This makes the Series 1 especially suited for delivering large amounts of power over a long period of time without charging.

Do you..
Demo with your car off?
Want to be able to go full tilt at a campfire without your car running for hours?
Attend indoor car shows and need a reliable and long-lasting battery to power your LEDs or accessories all day without plugging in a car charger?
Plan on replacing your OEM lead acid/AGM?

If you said yes to any of the above this is the Glowe Voltage battery for you.

Amplifier Support:

A Series 1 can comfortably support an 8,000 watt amplifier by itself.

Our “supported wattage” claim is based on both real world testing and several amplifier manufacturer’s maximum music output ratings. As an example, a Taramps Bass 8k has a listed maximum music consumption of 319 amps of current. An 8k Sundown Audio SFB we have tested at around 340 amps max. This battery can provide over 450 amps constant without falling below 12 volts.

Misc:

Have a stock alternator?  We recommend staying in the 8k watt range.

Have an upgraded (250+ amp) alternator?  You should be solid for 10k-12k watts on music. Keep in mind though that many high output alternators do not provide all of their rated output (sometimes very little of it) at idle RPM.

13.8 volts is the minimum recommended charging voltage. 14.8 volts is the maximum recommended. If your cold start voltage is 15 – 15.2 volts, you’ll be fine as long as it’s not constant and drops back down to 14.8v or below.

The Series 1 can *easily* provide enough power to start any car on the road.
You can use a Series 1 battery with your stock lead acid/AGM battery, no isolator needed.

We do not recommend using these under the hood of your car, with the exception being engine bays that have an isolated compartment intended for your OEM battery.

Technical Details:

Glowe Voltage Series 1
Capacity: 90 ah
Chemistry: Lithium Iron Phosphate (LifePo4)
Resting Voltage: 13.2 – 13.4
Charging Voltage: 13.8 – 14.8
Discharge: 450a (maintained for 60+ seconds over 12 volts)
Charge: 270a constant | 360a burst (60 seconds)
Discharge Temperature: -22F to 140F
Charge Temperature: -4F to 131F
Cycles: 2000+
Expected Lifespan: 7-10 years
Active Balancer: Yes (5 amp)

L/W/H: 10.5″ x 6.5″ x 8.5″
Weight: 20 lbs

Performance Testing:

Want to see what’s inside the box?  Exactly what you’re purchasing?  Check out this video to see the entire assembly process, start to finish!

Important!  Batteries are shipped at under 30% state of charge and should be charged completely before installation.
Don’t have a 12v LifePo4 charger?  Don’t want to spend $100 for something you’ll only use once?  Our standard 10a LifePo4 charger runs only $30 and is perfect for the task.  Get it here.